check to see if any foregn objects are near the float in the bottom of the tub usually those bread ties are the culprets make sure the float moves freely

There is a wide variety of cleaners on the market today for SS appliances, even regular glass cleaner depending upon the type of stains involved. If you want that fingerless magazine type look; try polishing by gently rubbing with a mixture of sodium carbonate and water using a soft rag, followed by a warm water rinse. Hope this Helps?

I really have no idea. The only thing I can think of is checking the lint trap. Maybe it is not tight or the hose end is not on. Hope that helps.

I would be more than happy to answere this question. First of all a built in dishwasher does not stand too steady on its own, once you open the door it usually topples over. So you gotta screw it down somehow. There are brackets along the bottom. Then you need to plumb in a 1/2" tee with a valve to your hot water pipe. run a flex line to your dish washer. Maybe you can look for couplers to put a couple of them together. You cannot just use a hose. you then need your standard dishwasher 90, which is a little piece of brass that adapts your dishwasher to the flex line. You then have to find a way to bring the drain to the sink or install an abs tee which adapts the dishwasher drain to your existing sink drain. As for the electrical the dishwasher can use 900 to 1500 watts which means you will need a complete circuit dedicated for it idealy. you can use the plug on your stove but don't use more than two elements at the same time. Your going to have to wire in your own plug to the dishwasher. There is a possibility that it will come with one. This project is the biggest pain but very possible.

No CSA and Building COde does not permit Extension cords for this use. To do it properly you would have to relocate the Outlet Box or Reselect a dryer with a cord exiting the dryer in a different spot which may allow you to reach again.

Old dial+push button models: the dial handles alot more function hidden that just being a visual timer aid. The dial tends to activate servos and other mechanical mechanism that activate when the dial is turned to a certain position. You are better off asing Bosch directly if parts are still made for this model, and if so, where is the closest authorized repair depot.
.
http://www.bosch.com/content/language2/html/3516.htm

Unfortunately at this time we do not sell parts for Maytag dryers. Sorry for the inconvenience.

Unfortunately at this time we do not offer a layaway plan. Sorry for the inconvenience.

If the seal is listed in the manual with a number, then chances are the answer would be, "yes". If you no longer have the manual, most major manufacterers have websites with downloads available for product manuals. The most likely answer to this question would be that the seal and door are manufactered as one-unit, and do not come as separate pieces. Some manufacterers will allow you to purchase the entire door as a replacement part. It depends on the brandname.

yes. as they have to test the machine before it leaves the factory to ensure it works and if you go away for more than a week you may want to dump a glass of water in before running it as damage to the water pump may result.