Customer Questions & Answers for
Angelo Décor 80 GPH Fountain Pump
Suitable for fountains and water features requiring up to 22" of water lift.
Questions & Answers for Angelo Décor 80 GPH Fountain Pump
Question
Can this pump be used for a misting system? What is the PSI
I am looking to use 1/4" tubing and mister/sprinkler attachments with a pump to mist my reptiles while I am away. Will this pump work?
asked 3 months, 2 weeks ago on 80 GPH Fountain Pump
by
Anonymous
- Sherwood Park
1 answer
Answers
answer 1
This pump is primarily intended and tested for use in fountain and pond applications. As a result, specific PSI ratings are not available.
The PSI value delivered will vary by the amount, type and width of the tubing including other factors, such as the feet head of your application.
You can calculate the PSI as follows:
PSI = Feet head (of water) x .433
Additional information about the pump that may be helpful:
Stop Height: 29 inches / 75 cm
Maximum Flow Rate: 80 Gallons Per Hour
Output sizes: 3/8 inch and 1/2 inch
This pump is recommended for fountains and water features requiring up to 22 inches of lift.
The PSI value delivered will vary by the amount, type and width of the tubing including other factors, such as the feet head of your application.
You can calculate the PSI as follows:
PSI = Feet head (of water) x .433
Additional information about the pump that may be helpful:
Stop Height: 29 inches / 75 cm
Maximum Flow Rate: 80 Gallons Per Hour
Output sizes: 3/8 inch and 1/2 inch
This pump is recommended for fountains and water features requiring up to 22 inches of lift.
answered 3 months, 1 week ago
by
FountainGuy
1 of 1