Customer Questions & Answers for
Bakor Bakor Blueskin WP 200
Heavy duty self adhered waterproof membrane for foundation walls. CCMC Evaluation 13297. Can be effectively applied in conditions to -5C with no special protection
Questions & Answers for Bakor Bakor Blueskin WP 200
Question
So how much does this product cost per sqft/m2?
The only info i can find is that the item is a cube: 40" deep x 36" high x 48" wide, which is very odd. It doesn't look like a cube with those dimensions by its picture. I thought it was a thin material that was kept in a roll.
asked 2 years, 2 months ago on Bakor Blueskin WP 200
by
Anonymous
1 answer
Answers
answer 1
Blueskin WP 200 waterproofing membrane comes in a roll which is 36" wide x 66.7', and will cover an area of approx. 185 sq. ft.
Your cost per square foot would work out to be aournd $0.69 per sq. ft.
Your cost per square foot would work out to be aournd $0.69 per sq. ft.
answered 2 years, 2 months ago
by
Henry123
Question
can this be added on top to a liquid rubberized membrane or would it not bond well to that?
asked 2 years, 2 months ago on Bakor Blueskin WP 200
by
Anonymous
1 answer
Answers
answer 1
Your liquid rubberized membrane is already acting as a waterproofing membrane....however, for additional protection, you would have to prime the liquid rubberized membrane first with Aquatac primer, and then apply the Blueskin WP 200 waterproofing membrane.
answered 2 years, 2 months ago
by
Henry123
Question
can this product be used on interior basement foundation walls
asked 2 years, 1 month ago on Bakor Blueskin WP 200
by
Anonymous
1 answer
Answers
answer 1
Blueskin waterproofing membrane cannot be used for the interior basement foundation wall. For such, we would recommend another product named USeal which provides a permanent waterporrof coating on any building surface of masonry. USeal is available at Home Depot.
answered 2 years, 1 month ago
by
Henry123
Question
Can you paint or cover this product on the exterior foundation wall that is above ground?
asked 2 years ago on Bakor Blueskin WP 200
by
Anonymous
1 answer
Answers
answer 1
You cannot paint it but you can certainly cover it.
answered 2 years ago
by
Henry123
Question
can this be applied on damp concrete parging which was previously submerged? How dry is "dry"?
asked 1 year, 9 months ago on Bakor Blueskin WP 200
by
Anonymous
1 answer
Answers
answer 1
WP200 can not be applied to a damp surface, the surface must be dry and make sure you use a primer. Hope this helps.
answered 1 year, 8 months ago
by
Zeee
Question
Should a foundation crack be repaired before applying blueskin
Should a crack be fixed before applying the primer and blueskin or will the membrane solve the problem of injecting anything into it .
asked 1 year, 9 months ago on Bakor Blueskin WP 200
by
Anonymous
- thunder bay ontario
1 answer
Answers
answer 1
yes it would be recommended that you do fix the cracks for better use of this product. Hope this helps.
answered 1 year, 8 months ago
by
Zeee
Question
Can this product be used for a tin mobile home roof?
asked 1 year, 9 months ago on Bakor Blueskin WP 200
by
Anonymous
1 answer
Answers
answer 1
No WP200 is a self adhesive waterproofing membrane designed for foundations. Hope this helps.
answered 1 year, 8 months ago
by
Zeee
Question
Should bluseskin membrane be applied underneath or out over the flashing around windows?
asked 1 year, 7 months ago on Bakor Blueskin WP 200
by
Anonymous
0 answers
Answers
This question currently has no approved answers.
Question
Can I put tile over this product on a balcony with living space underneath?
asked 1 year, 6 months ago on Bakor Blueskin WP 200
by
Anonymous
0 answers
Answers
This question currently has no approved answers.
Question
how wide should the blueskin membrane be
I would like to know how wide should the piece of blueskin membrane be for a vertical hairline crack in the basement wall.
asked 1 year ago on Bakor Blueskin WP 200
by
Anonymous
0 answers
Answers
This question currently has no approved answers.