Customer Questions & Answers for
Richelieu Blum Euro drawer slide 500mm/20 In.
500mm/20" Blum bottom mounted self-closing drawer slide in durable epoxy coating in cream. Smooth running synthetic rollers. Capacity 25kg/55lbs. Adapts to 32mm system. Sold as a set. Use item BP1278 for installation.
Questions & Answers for Richelieu Blum Euro drawer slide 500mm/20 In.
Question
As to the Slides...How many per package and do you have left sided slides?
I am missing two left side slides from two drawers in my wicker dresser.
asked 3 years, 8 months ago on Blum Euro drawer slide 500mm/20 In.
by
Anonymous
- Surrey
2 answers
Answers
answer 1
Yes there are left and right sides and they come as a kit (4pcs) - 2 drawer side slides L & R and 2 gable side slides also L & R
answered 3 months, 2 weeks ago
by
Owen
answer 2
The slides are sold in a set of two, one left and one right. I hope this helps.
answered 3 years, 8 months ago
by
OnlineAssociate
Question
Its been a long time since Ive installed these, just need a refresher on installation. Thanks
asked 3 months, 2 weeks ago on Blum Euro drawer slide 500mm/20 In.
by
Anonymous
1 answer
Answers
answer 1
The set comes with 2 gable sides and 2 drawer sides L & R and to allow proper functioning of the slide your drawer must be 1" (25mm) smaller than the interior width of the cabinet so leave 1/2" (12.5mm) on each side of the drawer. Position slides with the 90dg side at the bottom of the drawer while putting wheels at the back of the drawer. Align the front of the sides with the front of the drawer.
The front of the slides must be 1/16" (2mm) behind the side of the cabinet. To determnie the height of the installation, place the centre of your slides 1/2" (12.5mm) higher than the height you require for the bottom of your drawer. Use screws BP1278 that can be found in the Richelieu display at Home Depot. If this application is for a framed style drawer you will also need to purchase item BP603700112 (rear socket) as it will need to be installed on the back of your cabinet.
You can also go to out website www.richelieu.com and enter item TP10230030 and look under the TECHNICAL Tab and you can find printable instructions.
The front of the slides must be 1/16" (2mm) behind the side of the cabinet. To determnie the height of the installation, place the centre of your slides 1/2" (12.5mm) higher than the height you require for the bottom of your drawer. Use screws BP1278 that can be found in the Richelieu display at Home Depot. If this application is for a framed style drawer you will also need to purchase item BP603700112 (rear socket) as it will need to be installed on the back of your cabinet.
You can also go to out website www.richelieu.com and enter item TP10230030 and look under the TECHNICAL Tab and you can find printable instructions.
answered 3 months, 2 weeks ago
by
Owen
1 of 1