Customer Questions & Answers for
RIDGID RIDGID 10 In. Portable Table Saw with Stand
The RIDGID Heavy Duty 10 In. Portable Table Saw with Stand features a powerful 15 Amp motor and soft Start that provides smooth starting, prolongs motor life and reduces breaker tripping. On-Board storage holds rip fence, mitre gauge, blade guard assembly, extra blades, and power cord within easy reach for transportation. Quick change blade guard assembly is easily installed or replaced without tools. Single height/bevel adjusting handwheel includes both quick and micro bevel adjustment with blade height lock. "T" Slot mitre gauge provides additional capacity for cross-cutting.
Questions & Answers for RIDGID RIDGID 10 In. Portable Table Saw with Stand
Question
What shopvac connection will fit?
I'm reading reviews stating a 2.5" shop vac fits, but I also read someone say it's a 2" connection. I'm confused, do both 2" and 2.5" work? 2.5 is a standard size so I'm assuming its a 2.5" ?
asked 1 year, 3 months ago on RIDGID 10 In. Portable Table Saw with Stand
by
Rekster
- Niagara Falls
3 answers
Answers
answer 1
Not sure why the one answer says this saw is a piece of junk?!? Many many excellent reviews out there. Anyway, yes, both sizes work. One fits over the connection, one fits on the inside.
answered 1 year, 1 month ago
by
VictoriaBBQer
- Victoria, BC
answer 2
Neither connection works very well. This saw is a piece of junk.....just avoid it completely!
answered 1 year, 3 months ago
by
Goober
answer 3
This will take the 2 inch classifacation of hose. 2 in ID and 2.5 OD. It is a friction fit as well. The Ridgid hoses will attach right on for example.
answered 1 year, 3 months ago
by
ridgidexpert
Question
Does Home Depot carry the dado blade insert?
asked 2 years, 8 months ago on RIDGID 10 In. Portable Table Saw with Stand
by
Anonymous
2 answers
Answers
answer 1
Yes, but you may have to ask a sales associate to order one for you. I have not seen it available online, but I was able to find one in my local store.
answered 1 year ago
by
mistuhd
- Saskatchewan
answer 2
Yes, they can order the part for you. Be sure to tell the associate which model number your saw is. There are two models, the TS 2400 and the TS2410.
answered 2 years, 8 months ago
by
ridgidexpert
Question
Why is the Ridgid table saw not CSA approved?
asked 2 years, 2 months ago on RIDGID 10 In. Portable Table Saw with Stand
by
Anonymous
2 answers
Answers
answer 1
You must be looking at one in The States. Mine from Canada was CSA approved.
answered 5 months, 3 weeks ago
by
Longtimediyer
- Latchford, Ontario (cottage)
answer 2
This saw is approved for safe use in Canada. We use an agency that has the same standards as CSA. They test all our tools coming into Canada. We do this so that we can use one agancy to all our tools testing for saftey in both the US and Canada.
answered 2 years, 1 month ago
by
ridgidexpert
Question
Is there a manual on-line?
asked 2 years ago on RIDGID 10 In. Portable Table Saw with Stand
by
Anonymous
2 answers
Answers
answer 1
Contact Ridgid direct. I would be very surprised if they couldn't send you one.
They have been very good with me.
http://www.ridgid.com/Tools/Support/
They have been very good with me.
http://www.ridgid.com/Tools/Support/
answered 5 months, 3 weeks ago
by
Longtimediyer
- Latchford, Ontario (cottage)
answer 2
There are certain manuals available on line at Ridgidtools .com
answered 2 years ago
by
ridgidexpert
Question
can i hook up a ridgid shop vac to it?
asked 2 years ago on RIDGID 10 In. Portable Table Saw with Stand
by
Anonymous
2 answers
Answers
answer 1
No problem at all. I hooked up my Rigid shop vac with no problems.
answered 1 year, 7 months ago
by
KenDG
- Sherwood Park., AB
answer 2
Yes the vac with friction fit right on to the saw
answered 2 years ago
by
ridgidexpert
Question
What are the o/a dimentions of the Portable Table Saw when folded and stood vertical?
asked 2 years ago on RIDGID 10 In. Portable Table Saw with Stand
by
Anonymous
- Ontario Canada
2 answers
Answers
answer 1
Please disregard my previous answer i was writing on the wrong model of saw. ...the over all dimensions are about 18 inches in depth, 2 feet at the table top and 3 feet plus the 25 inch rip allowance.
answered 2 years ago
by
ridgidexpert
answer 2
The size of the saw dimensions are listed on the Home Depot Product website. This saw does not unfold, but does go to a 25 inch rip width
answered 2 years ago
by
ridgidexpert
Question
can the rigid saw be changed to 220 volt model r4510
asked 2 years ago on RIDGID 10 In. Portable Table Saw with Stand
by
Anonymous
2 answers
Answers
answer 1
No. This saw is 120V only.
answered 1 year ago
by
mistuhd
- Saskatchewan
answer 2
If you re wired the motor , yes. But really designed for 120/ 15 amp circuit. Good to put it on a 20 amp for start up. But the saw is a soft start, so not as much power right at start up
answered 2 years ago
by
ridgidexpert
Question
How can this saw be sold in Canada if it's not CSA approved?
asked 1 year, 11 months ago on RIDGID 10 In. Portable Table Saw with Stand
by
Anonymous
2 answers
Answers
answer 1
I have way more trust in UL over CSA. Don't worry about it.
answered 11 months ago
by
prcd164
- Saskatchewan
answer 2
CSA approval / certification is a completely voluntary process. There is absolutely no legal requirement for anything to be CSA approved for retail sale in Canada. Most manufacturers go through the process as a cost of doing business - it shows that their products meet the minimum safety requirements, but again, it is up to the manufacturer as to whether they participate. The CSA is kind of like the Better Business Bureau - someone to consult or complain to. It looks better if there has been approval if product recalls become necessary.
answered 1 year, 11 months ago
by
GinMississuaga
Question
Max size dado blade?
asked 1 year, 11 months ago on RIDGID 10 In. Portable Table Saw with Stand
by
Anonymous
2 answers
Answers
answer 1
I have used a 3/4" dado set, but in this case, I tend to remove the blade stabilizer so that the nut has sufficient purchase on the spindle.
answered 1 year ago
by
mistuhd
- Saskatchewan
answer 2
The widest it will go is 3/4 of an inch as the shaft or arbour is a not quite as long as a large table saw.
answered 1 year, 11 months ago
by
ridgidexpert
Question
what is the hose power -model R4510
asked 1 year, 10 months ago on RIDGID 10 In. Portable Table Saw with Stand
by
Anonymous
2 answers
Answers
answer 1
My manual says 15 amp only. You can get a rough idea of HP from there. I'd guess just under 2 HP
answered 5 months, 3 weeks ago
by
Longtimediyer
- Latchford, Ontario (cottage)
answer 2
2 HP under load at the blade. In other words 2 hp when cutting wood. Other saws claim more HP but that is not under load. The motor is a 15 amp motor, and 1 hp equals 6.5 amps so, 6.5 plus 6.5 equal 13 amps which puts in the 2 HP range along with how the saw is geared up at the blade.
answered 1 year, 10 months ago
by
ridgidexpert