Customer Questions & Answers for
Dremel Rotary Tool Workstation
Functions as an articulating drill press that rotates 90 degrees, rotary tool holder, and flex-shaft tool stand.
Questions & Answers for Dremel Rotary Tool Workstation
Question
Is this accessory compatible with the 300 - series model?
Just wondering, as many accessories seem to be specifically for the XPR model.
asked 3 years, 6 months ago on Rotary Tool Workstation
by
Zeddery
3 answers
Answers
answer 1
Yes
answered 8 months ago
by
DremelCustomerService
answer 2
Yes,it will work fine with the 300 series...I have found the XPR series will work with 90% of the accessories...If not...contact service at Dremel and you will find they will go out of their way to help you....
answered 11 months ago
by
GOTWOOD
- Abbotsford, B.C.
answer 3
Hi Zeddery
Yes, this rotary tool workstation is compatible with the 300 series model.
Yes, this rotary tool workstation is compatible with the 300 series model.
answered 3 years, 5 months ago
by
OnlineAssociate
Question
is this product compatible with the 4000 series dremel tool?
asked 1 year, 9 months ago on Rotary Tool Workstation
by
Anonymous
3 answers
Answers
answer 1
yes
answered 7 months ago
by
DremelCustomerService
answer 2
Yes , Work Station works great with the 4000 series..
answered 11 months ago
by
GOTWOOD
- Abbotsford, B.C.
answer 3
Yes, the Work Station is compatible with the 4000 series tool.
answered 1 year, 9 months ago
by
DremelExpert
Question
Would this rotary tool be sufficient for drilling rock?
I make jewerly from stone/rock and looking for small drill press that would work for drilling rock.
asked 2 years ago on Rotary Tool Workstation
by
Anonymous
3 answers
Answers
answer 1
No.There are accessories that will etch and grind in rock, unfortunately, there is nothing to drill holes in rock.
answered 8 months ago
by
DremelCustomerService
answer 2
Yes, it will do a fine job..I have been using it to cut stone, drilling stone and making jewelry with it...I am very pleased with the quality of this tool....
answered 11 months ago
by
GOTWOOD
- Abbotsford, B.C.
answer 3
Yes, you can use the drill press for drilling rock. My question is how would you clamp the rock other than holding it? Secondly, the dremel bits are not design to drill precise holes in "rock". If you are using the diamond bits, they are generally used for shaping not drilling.
answered 2 years ago
by
DremelExpert
Question
is it compatible with the Dremel 1100-N/25 Stylus 7.2V?
asked 11 months ago on Rotary Tool Workstation
by
Anonymous
3 answers
Answers
answer 1
No. The Stylus does not accept any attachments.
answered 8 months ago
by
DremelCustomerService
answer 2
No
answered 8 months ago
by
DremelCustomerService
answer 3
No, the Stylus 1100-N/25 is not compatible with the 220-01 Work Station.
answered 10 months ago
by
DremelExpert
Question
is the dremel work station compatible with the 8200?
asked 1 year, 3 months ago on Rotary Tool Workstation
by
Anonymous
2 answers
Answers
answer 1
yes
answered 7 months ago
by
DremelCustomerService
answer 2
Yes, the Work Station is compatible with 12V 8200 cordless tool.
answered 1 year, 3 months ago
by
DremelExpert
Question
Is it include the rotary drill ?
asked 1 month, 3 weeks ago on Rotary Tool Workstation
by
Anonymous
2 answers
Answers
answer 1
No, you have to buy the rotary tool separately, but you can get it at Home Depot, Canadian Tire, etc.
answered 1 month ago
by
willowtree49
- Hawkesbury ON
answer 2
No, rotary tool is not included.
answered 1 month, 2 weeks ago
by
DremelExpert
Question
is it compatible with the 1100-N/25 Stylus 7.2V?
asked 11 months ago on Rotary Tool Workstation
by
Anonymous
1 answer
Answers
answer 1
No, the 1100 Stylus is not compatible with the 220 Work Station.
answered 10 months ago
by
DremelExpert
Question
Will this lock at a precise depth (for precision routing)
Will this lock at a precise depth for precision routing?
asked 8 months ago on Rotary Tool Workstation
by
Anonymous
1 answer
Answers
answer 1
It will lock at a desired depth, but there is not a precision dial.
answered 7 months ago
by
DremelExpert
1 of 1