The only thing that comes with this is the back wall and the two side walls. The tub section is separate. Please see below for the tub option (available left or right hand). I hope this helps.

These shower walls do need to be caulked. Sorry for the inconvenience.

Hello,

Yes, you need to remove all material from your walls. When installing these types of units, the tub, tiles and drywall should be removed. You will be left with bare stud walls.
FYI - when covering existing materials like tile or drywall, you may be covering a problem you didn't know was there (water damage, mold etc.)
Take the time and effort to do it right the first time - you'll be glad you did!

Thank you.

Hello,

This product comes in two sections to make up the whole. There is a wall section (3 panels) and a tub section. The depth of the wall section is 24.25". The tub measurement is located on another page and the total depth of the bathtub is 32.5".
Mirolin does not currently manufacture a 30" tub/shower combination unit.
You can view and download detailed dimensions from our website at www.mirolin.com.

Thank you.

Hello,

It sounds like the Belaire would fit your width and depth requirements. As this is a renovation you would likely need the Multipiece version (shown above). The only other measurement that you would need to confirm is the height measurement. The total height of this unit is 80" high.
You can view and download detailed specs from our website should you need to: www.mirolin.com.

Thank you.

Hello,

Most Mirolin models are designed to fit in "standard" bath openings. Modifying the units is not recommended as it will void the Warranty. Additionally, the product may not perform to expectations.

* If you are measuring your opening from say tile to tile, you must take into account the thickness of the tile and backing material (drywall). Once all this material is removed, you will likely end up with a 60" opening which can accommodate several products.

Thank you.

Hello,

Wall set: $453.00
Bathtub: $446.00

Total price: $899.00

Thank you.

Hello,

Without more information, it's difficult to get you a good answer...What type of surround? Direct to stud or glue-up? What type of material? Who makes your current shower base? Is it installed? Is the surround going over tile, cement board or drywall? Are you planning on installing a shower door? One-piece or Multi-piece? Etc.

Thank you.

Hello,

Assuming the installation instructions were followed, you should not have any issues. You can call in to 1-800-760-3388 and ask for tech support to better describe the noise you are experiencing.

Thank you.

Hello,

Sounds like you should be ok. The total height of the bathtub portion is 22", turned on its side, the tub would clear the width of your doorway. The wall sections are in three pieces and will pass through easily.

Thank you.