Customer Questions & Answers for
Schlage Front Entry - Keyed Locking Lever, Flair, Satin Nickel, SecureKey
The Flair keyed locking lever in Satin Nickel is ideal for entry doors. Made from quality materials and construction for exceptional security.
Questions & Answers for Schlage Front Entry - Keyed Locking Lever, Flair, Satin Nickel, SecureKey
Question
HOW DO YOU TIGHTEN A SCHLAGE MODEL 79912 HANDLE AND THE PLATE THAT IS NEXT TO DOOR FACE?
I HAVE THE SMALL PIN BUT I'M A LITTLE LEARY OF HOW TO USE IT, WE BOUGHT IT LAST YEAR AND THE HANDLES ARE LOOSE ALSO THE ROUND PLATE THAT IS FLUSH WITH THE DOOR FACE.
asked 3 months, 2 weeks ago on Front Entry - Keyed Locking Lever, Flair, Satin Nickel, SecureKey
by
Anonymous
1 answer
Answers
answer 1
Thank you for your inquiry. Tightening the door handle to the door is done from the interior side of the door. On the model shown here, the two screws are exposed on the round "trim" and can be tightened with a phillips screwdriver. The round trim is snapped onto the metal chassis. If it is loose, please adjust it so that the screw holes are showing over the screws and snap it in to place (before tightening the screws).
If you actually have a different model where there are no screws showing, use the pin to remove the inside lever by pulling it straight off. Next pull the "trim" off (there are a couple of indentations around the edge where a small flat screwdriver can be used to pry it off). Tighten the 2 screws and reverse the steps.
If you actually have a different model where there are no screws showing, use the pin to remove the inside lever by pulling it straight off. Next pull the "trim" off (there are a couple of indentations around the edge where a small flat screwdriver can be used to pry it off). Tighten the 2 screws and reverse the steps.
answered 3 months, 2 weeks ago
by
SchlageExpert
- Canada
1 of 1