The rough opening would be dependant on if its an alcove or island application. Installation details can be provided by American Standard at either www.americanstandard.ca or 1-800-387-0369.

The Renaissance whirlpool can be installed in an alcove application.

The Renaissance whirlpool will fit an opening 60" x 32" +/- 1/4". The height of the tub is 21". American Standard also makes a wide range of 3 piece shower and bathing units. Feel free to visit www.americanstandard.ca to see optional designs.

The Renaissance whirlpool can hold a maximum of 61 gallons of water, but the minimum operating volume is 42 gallons.

All "controls" for the Renaissance whirlpool are integral to the tub, and do not require installation on any additional surface.

Yes, this whirlpool does have specific electrical requirements. A qualified electrician should be consulted for the hook-up. Failure to do this will affect your warranty.

The extent of material needs, would depend on the size of your renovation. The tub would require a drain (such as 1583470.002), or if you would like to use the design matched apron panel (2731560P.020) they can be ordered through your local Home Depot store. If you visit www.americanstandard.ca for installation instructions, it may provide more insight for building materials required for your specific renovation.

Yes, the Renaissance whirlpool can be used with a shower walls or doors.

There are two options for the apron on the Renaissance whirlpool tub. The first option is to build/frame an apron. The second option is to purchase a design matched apron sold at Home Depot, model 2731560P.020

The design matched apron (model 2731560P.020) has a removable apron panel, but the apron should not be used as the primary access opening. An additional opening is required for access to service the pump and controls. American Standard can provide you the detailed installation instructions.