Customer Questions & Answers for
1-Part Epoxy Acrylic Concrete & Garage Floor Paint - Silver Gray, 3.79L
A high-performance, ready-to-use, water-based floor paint that resists hot tire pick-up and marring. The finish is highly resistant to chemicals, oil and gasoline, which reduces the need for maintenance of hard-to-clean interior or exterior floors. This
Customer Questions & Answers:
4 Questions
| 4 Answers
Overall Rating:
Questions & Answers for BEHR 1-Part Epoxy Acrylic Concrete & Garage Floor Paint - Silver Gray, 3.79L
Question
Behr Epoxy Acrylic Floor Paint
My concrete garage floor has a surface hardener on it. Will this paint adhere properly to concrete hardener?
asked 5 years, 1 month ago on 1-Part Epoxy Acrylic Concrete & Garage Floor Paint - Silver Gray, 3.79L
by
Anonymous
- Sherwood Park
1 answer
Answers
answer 1
Generally, in these instances if the hardener will allow our product to absorb into the surface then it will be fine to use. If the hardener is too slick then it will not allow our product to properly grab onto the surface. We would also suggest to refer to the instructions on the hardener regarding the painting of their product.
Source: BEHR Representative
Source: BEHR Representative
answered 5 years ago
by
OnlineAssociate
Question
How big an area will Behr epoxy acrylic paint cover?
Behr 1-Part epoxy acrylic concrete/garage floor paint (SKU# 110936) Behr Model#901.
My concrete shop floor (enclosed) covers about 600 sq ft. Will a single unit of this product be sufficient to cover this floor? If not, can it be applied in stages (i.e., 1/2 floor at a time)? Is that a problem for this product? How much product would be required to completely cover this size of floor? What maintenance is required once the product is applied and ready for traffic?
My concrete shop floor (enclosed) covers about 600 sq ft. Will a single unit of this product be sufficient to cover this floor? If not, can it be applied in stages (i.e., 1/2 floor at a time)? Is that a problem for this product? How much product would be required to completely cover this size of floor? What maintenance is required once the product is applied and ready for traffic?
asked 4 years, 9 months ago on 1-Part Epoxy Acrylic Concrete & Garage Floor Paint - Silver Gray, 3.79L
by
Carpenter599
- Niagara Falls Region, ON
1 answer
Answers
answer 1
The epoxy should be applied at 400-500 square feet per gallon on smooth surfaces and 400-500 square feet per gallon on rough surfaces. When applied in stages a line may develop between the applications. Maintenance touch ups may be needed in the areas where the tires come in contact with tires.
answered 4 years, 7 months ago
by
BehrExpert
Question
I just put the Behr 1 Part Epoxy acrylic concrete and garage paint down, Is there a recommended urethane top coating I can use with this paint?
asked 2 years, 11 months ago on 1-Part Epoxy Acrylic Concrete & Garage Floor Paint - Silver Gray, 3.79L
by
Anonymous
1 answer
Answers
answer 1
Behr's Wet-Look Sealer and Low Lustre Sealer can be applied over the 1-Part Epoxy finish. These sealers are not necessary but can be used for cosmetic purposes.
answered 2 years, 8 months ago
by
BehrRep
Question
is it good for a Pool Concrete Patio/Deck?
The concrete surface surrounding my pool starts to get old, could I use this paint to give it a better appearance?!
asked 2 years, 11 months ago on 1-Part Epoxy Acrylic Concrete & Garage Floor Paint - Silver Gray, 3.79L
by
Anonymous
1 answer
Answers
answer 1
Behr's 1-Part Epoxy may be applied on pool concrete patios and decks. Keep in mind that film forming products may become slippery when wet. Behr's Non-Skid Additive can be used with this product for added protection.
answered 2 years, 8 months ago
by
BehrRep
1 of 1