Customer Questions & Answers for
Kidde Hardwire Hush Smoke Alarm with Battery Back-up
Hardwire Smoke Alarm with battery back up and Hush feature to quickly silence nuisance alarm.
Questions & Answers for Kidde Hardwire Hush Smoke Alarm with Battery Back-up
Question
Will this unit also be triggered by the 120volt combo unit by Kidde (KN-COSM-IBCA)
asked 2 years, 5 months ago on Hardwire Hush Smoke Alarm with Battery Back-up
by
Anonymous
2 answers
Answers
answer 1
Any Kidde smoke alarm that is hardwired and interconnected can trigger all other smoke alarms on the same interconnect wire. Just as, all Kidde CO alarms will trigger all other CO alarms on the same interconnect wire. A CO alarm will not trigger a smoke alarm on the same interconnect wire.
answered 1 year, 4 months ago
by
Kidde
answer 2
Yes, this unit is compatible with the KN-COSM-IBCA. I hope this helps.
answered 2 years, 4 months ago
by
OnlineAssociate
Question
Will this unit work with a light outlet that is on the same circuit?
asked 2 years, 1 month ago on Hardwire Hush Smoke Alarm with Battery Back-up
by
Anonymous
- Vancouver
1 answer
Answers
answer 1
Hardwired interconnected smoke alarms should be installed on their own separate circuit. They must not be on a switched circuit where the power can be turned on and off like a light switch.
answered 1 year, 4 months ago
by
Kidde
Question
where do i plug in the interconector wire? Is it with the neutral or the black feed wire from the ceilling?
when it come to a three wire smoke detector I have a neutral white to neutral white from ceiling then a black feed line to the black power from the ceiling now where do I attach the interconector from the smoke detector.? To the white neutral or the black power?
asked 1 year, 10 months ago on Hardwire Hush Smoke Alarm with Battery Back-up
by
Anonymous
1 answer
Answers
answer 1
It is very important to read the manual specially the wiring section of the manual when installing this alarm. However to give you a quick advice on the wiring.
You need to ensure that 3 Wires are coming out of the ceiling. If there are only 2 (white and Black), then attach the White to White and Black to Black. As for the Red – Do NOTHING – Connecting the red to white or Black will cause the alarm extreme damage
Hope this helps.
You need to ensure that 3 Wires are coming out of the ceiling. If there are only 2 (white and Black), then attach the White to White and Black to Black. As for the Red – Do NOTHING – Connecting the red to white or Black will cause the alarm extreme damage
Hope this helps.
answered 1 year, 8 months ago
by
Zeee
1 of 1