Customer Questions & Answers for
GREAT STUFF PRO PRO 13 Foam Dispensing Gun
For use with GREAT STUFF PRO Insulating Foam Sealants, the PRO 13 foam dispensing gun provides precise control of bead size, reducing foam waste.
Questions & Answers for GREAT STUFF PRO PRO 13 Foam Dispensing Gun
Question
Is this gun compatible with all Great stuff cans? What about other brands?
asked 4 years, 1 month ago on PRO 13 Foam Dispensing Gun
by
goach
- St. Catharines
2 answers
Answers
answer 1
The Great Stuff Pro 13 dispensing gun will work with all the Great Stuff Pro products that have a top designed to be used with the Great Stuff Pro guns. We do not recommend attempting to use the Great Stuff Pro dispensing guns with any other brand name products as they may not seal correctly to the gun.
answered 1 year, 6 months ago
by
DOWCIG
- Midland MI
answer 2
The GREAT STUFF PRO™ products are the only GREAT STUFF™ products that offer the gun option. With that said, not all of the GREAT STUFF PRO products can be used with a gun as some are sold to be used with a straw only(straw included). Not certain about other brands.
answered 4 years, 1 month ago
by
Foamer
Question
How do you clean the gun after you use it.
Just woundering how you clean the gun. Once you use a straw with other cans the straw is shot and you cant use it again. So I would like to know how the gun is cleaned.
Thanks
Ryan
Thanks
Ryan
asked 2 years, 2 months ago on PRO 13 Foam Dispensing Gun
by
Anonymous
- Windsor
2 answers
Answers
answer 1
To clean the PRO Series foam dispensing gun, unscrew the can of GREAT STUFF PRO™ Insulating Foam Sealant or Adhesive and attach a can of GREAT STUFF PRO™ Gun Cleaner, making sure the threads are straight. Pull the trigger and dispense contents into a covered container lined with a disposable bag, e.g., a trash can with a lid, and dispose per local, state/provincial and federal regulations. Dispense cleaner until there are no signs of residual foam. This usually requires about half a can of GREAT STUFF PRO™ Gun Cleaner. When detaching the cleaner, continue to pull trigger while unscrewing the cleaner from the gun to help prevent spray back.
answered 1 year, 6 months ago
by
DOWCIG
- Midland MI
answer 2
Home Depot sells gun cleaner to remove UNcured foam from the nozzle, exterior and the foam can.
Products from my answer
Gun Cleaner, 340 g
answered 1 year, 10 months ago
by
BigDaddyHfx
- Dartmouth, NS
Question
can I get replacement parts for the Great stuff pro?
asked 1 year, 8 months ago on PRO 13 Foam Dispensing Gun
by
Anonymous
1 answer
Answers
answer 1
We are sorry to say there are no replacement parts for the Great Stuff Pro Guns other then the replaceable dispenser tips for the PRO 14 and PRO 15 guns. There is a 30 day warranty on dispensing guns. If you have problems with any of the Great Stuff Pro Guns please work with the point of purchase on these issues.
answered 1 year, 6 months ago
by
DOWCIG
- Midland MI
Question
Do the Great Stuff cans have to be used with the can upside down? How do you fill voids where the tube is too short to reach above the can base?
asked 1 year, 3 months ago on PRO 13 Foam Dispensing Gun
by
Anonymous
- Calgary, AB
1 answer
Answers
answer 1
As it states on every can of Great Stuff Pro (TM) the can must be kept inverted while dispensing, this insures proper dispensing of the Great Stuff Pro (TM) product with every use. Fill gap less than 50 percent full to allow for proper expansion. The Pro 13 dispensing gun comes with an extended barrel for long-reach applications.
answered 1 year, 3 months ago
by
DOWCIG
- Midland MI
1 of 1